SMPS LED Driver 100w IP67 Waterproof 12v 8a Constant Voltage Switching Power Supply 230v 220v ac dc Lighting Transformer

Detailed Product Description

                     100W 5V/12V/24V Waterproof IP67 power supply

Plastic Shell IP67 Waterproof Series

100w 12vdc output, 100-240vac input

led switching power supply/lighting transformer

( Package: 1 x LP100-W1V12 )

Product Feature

1. Plastic shell IP67 waterproof series, mainly used in LEDs fields.

2. Waterproof IP67, widely used outdoor or indoor with large of water vapor.

3. Full of 100% pure glue, best for cooling, no fan design and quiet.

4. 100% full load burn-in test. Usable 50W ~ 100W but advise 50W ~ 80W.

5. Protections: short circuit, over load, over voltage, over temp.

Product View

				LP  100W
				FEATURES
				100% full load burn-in test
				Universal AC input
				Small size and high efficiency
				Conform to EMC EN5502 GB9254
				Built-in EMI filter with tiny ripple
				Comply with the safety standards GB4943 IEC60950-1 EN60950-1
				Protection: short circuit/over current/over load/over temperature
MODEL						LP100-W1V12		LP100-W1V24
OUTPUT		DC VOLTAGE				12V		24V
		VOLTAGE TOLERANCE				±5%		±5%
		RATED CURRENT				8.3A		4.2A
		CURRENT RANGE				0-8.3A		0-4.2A
		RATED POWER				100W		100W
		RIPPLE& NOISE (MAX.)				100mVp-p		120mVp-p
		POWER FACTOR(Typ.)				0.6		0.6
INPUT		VOLTAGE RANGE		100-240VAC
		FREQUENCY RANGE		50/60 Hz
		AC CURRENT(Typ.)		1A/115V, 0.5A/230V
		EFFICIENCY(Typ.)				84%		85%
		COLD START CURRENT		40A/AC230V
		SETUP, RISE, HOLD UP TIME		100ms, 50ms, 20ms
		NO-LOAD CURRENT		<10mA/240VAC
PROTECTION		OVER LOAD		hiccup 105%~150% of the rated power 100W,
				recovers automatically after fault condition is removed
		OVER CURRENT		hiccup over the maximum rated current,
				recovers automatically after fault condition is removed
		SHORT CIRCUIT		hiccup short circuit,
				recovers automatically after fault condition is removed
		OVER TEMP		hiccup the Rectifier ≥85°C,
				recovers automatically after temperature fall to environment temp
ENVIRONMENT		WORKING TEMP		–20°C~+60°C (no frost)
		WORKING HUMIDITY		20%~90%RH
		STORAGE TEMP		–40°C~85°C
		STORAGE HUMIDITY		10%~95%RH
SAFETY&EMC		SAFETY STANDARDS		CE, ROHS
		WITHSTAND VOLTAGE		I/P-O/P: 1.5KVAC/1min, I/P-F/G: 1.5KVAC/1min, O/P-F/G: 0.5KVAC/1min
		EMC                                  TESTING STANDARD		EN55022:2010; EN61000-3-2:2014; EN61000-3-3:2013;EN55024:2010+A1:2015
				EN61347-1:2008+A1:2011+A2:2013; EN61347-2-13:2014
REMARK		1. The above mentioned data were measured at 220VAC input and 25°C.
		2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated
		with a 0.1uf & 47uf parallel capacitor.

Product Packing