Simple SD RGB Controller

Detailed Product Description

Summarization
SD the card RGB controller advanced computer control chip, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on. The system can search and read the first "*led" data files when power on. It has the wiring to be nimble, the wiring is convenient, use simple and so on; It can realize the jump, the gradation, the frequency, the horse race, running water and so many effect, according to the customer physical demand. User can also edit the data flies through the incidental pattern editing software（Led Editor v1.0）, kinds of change pattern , easy to use , The specific method of editing software see instructions.

 

Technical parameters
● working temperature: -20-60℃
● supply voltage: DC12-24V
● external dimension :L128ΧW64ΧH24 mm
● packing size ：L160ΧW95ΧH50 mm
● net weight : 140g
● gross weight: 175g
● static power consumption ：<1W
● Frame frequency: 1 to 25 frames per second
● output: Three-Channel MOS with open-drain output
● output current:<4A(each channel)
● output power: 12V:144W, 24V:288W

 

External Dimention

 

 

 

 

 

 

 

Interface Specifications 

 

         Power output interface:

 

 

 

 

Adopt conventional DC power transposon as power input interface, and equip with DC plug.

 

 

SD input interface :

 

 

 

 

Power input interface ( mode2 ):

 

 

 

Adopt male and female connector with screw.

      

                              

           Load output interface:

Adopt male and female connector with screw

 

 

 

Direction for use

 

1) Connect the load wire at first, following by the power wire; Please ensure short circuit can not           occur between connecting wire before you turn on the power.

 

2) Make sure SD card is formatted (FAT32).

 

3) It is best to delete the extra files, make sure the document which read is needed.

 

4)In the absence of an SD card or SD card reset was not successful, the system will play scheduled change programmes (7 color jump), and the green indicator light is off (Typ Green follows the playback speed and blinking), users can use this to identify the failure. If no card status to plug in the card, the power-on reset again.

 

5) If you want to put out the SD card ,please power off first, otherwise the SD card will be broken.

 

6) All the parameters in the factory has according to user's requirements and using environment, if the user configuration files to his editing data patterns, please read carefully the attached relevant documents

  

 

 

 

Typical Application

 

Applied circuit 1:

 

 

Applied circuit 2: