Master-slave dream-color controller

Detailed Product Description

Summarization
This controller is one of the basic product platform in our company, Controller should collocate with slave controller. It can achieve some functions such as jumpy changing, running water pattern, horse racing, gradual changing, stroboflash and so on, the specific change mode could be ordered according to the requirement of customer.
 

 

Technical parameters
Master controller technical parameters
● Working temperature: -20-60 ℃ 
● Supply voltage: DC12V
● Output: RS485 signal
●External dimension: L222 Χ W130 Χ H40 mm
● Packing size: L232ΧW180ΧH55mm
● Net weight: 760 g
● Gross weight: 830 g
Slave controller technical parameters
● Working temperature: -20-60 ℃ 
● Supply voltage: DC5V
● Output: two groups SPI signal,485 signal
● External dimension: L123 Χ W72 Χ H27 mm
● Packing size: L145 Χ W95 Χ H50 mm
● Net weight: 100 g
● Gross weight: 130 g
●Static power consumption: <1W

 

 

 

External Dimension

 

Master controller external dimension:

 

 

Slave controller external dimension:

 

 

 

Interface specification

     Master controller interface specification:

Power input interface:

 

 Adopt conventional DC power socket as power input interface.

 

RS485 signal output interface:

  

Adopt 3-pin-block as signal interface.

 

     Slave controller interface specification:

 

Power input interface:

 

 Adopt conventional DC power socket as power input interface.

 

SPI signal output interface:

   

         

RS485 signal output and input:

 

 

 

Direction for use

 

Master controller:

1. Adopt button control, and every button function as follows:

 Mode: mode button, the pattern changes press once, there are 27 modes in all.

 Para: parameter choice button.

 Up: the chosen parameter increasing button.

 Down: the chosen parameter decreasing button.

2. Parameter adjustment as following:

NO.	Parameters	Specifications
		MAX	MIN
1	SPEED (running speed)	10	1
2	Slave Num (set up Slave number)	200	1

     

3.  Standard color changes as follows:

NO.	Modes	Functions	Remarks
1	1_Red	Static red
2	2_Green	Static green
3	3_Yellow	Static yellow
4	4_Blue	Static blue
5	5_Purple	Static purple
6	6_Cyan	Static cyan
7	7_White	Static white
8	8_Jump_7	Seven-color jumpy changing
9	9_Gradual_7	Seven-color gradual changing
10	10_ Jump_3	Three-color jumpy changing
11	11_Horse_L1	Red horse race lamp to left
12	12_Horse_R1	Green horse race lamp to right
13	13_Horse_L2	Blue horse race lamp to left
14	14_Horse_R2	White horse race lamp to right
15	15_ Glitter	Seven-color stroboflash
16	16_R_flash	Red stroboflash
17	17_G_flash	Green stroboflash
18	18_B_flash	Blue stroboflash
19	19_Flow_L	Seven-color running from left to right
20	20_Flow_L7	Seven-color running after from left to right
21	21_Flow3_L	Three-color running after from left to right
22	22_Flow33_L	RGB right running form
23	23_ AllColorWave	All color wave from left to right
24	24_Tail7_L	Seven-color tail after from left to right
25	25_Ponit7_R	Seven-color running after from right to left
26	26_ 26_Tail3_L	Three-color tail after from left to right
27	27_ Autoplay	Automation	Automatic mode cycle from 1 to 26

 

 

Slave controller:

1. When the slave controller used with the master controller, the change mode controlled by the master controller.

When the slave used alone, it adopts button control, every button function as follows:

 ON/OFF button, it can open or close led anytime;

Play/pause button, can display or pause led change, in order to observe the static effect of led .

Adding button, changing speed increase button;

Reducing button, changing speed decrease button, there are 100 speed levels in all.

 Program choose button,down direction;

 Program choose button, up direction, there are 27 programs in all.

   

2.  Connect the load wire at first, following connect the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

 

3.  Signal output interface direction: L,C,D,S,G mean LATCH,CLOCK,DATA,SPEED,GND respectively.

485 signal input and output;

 

4.  The controller signal output wire and input wire should be connected correctly.

 

 

Typical Application