Illumination Compensation Controller
| Place of Origin | China |
|---|---|
| Brand Name | okled |
| Model Number | TC500 |
| Inquiry | |
Detailed Product Description
Product Specifications
NAME: Illumination Compensation Controller
MODEL: TC500
,
Summarization
TC500 is a multi-function sensor developed by our company, with beautiful appearance. The sensor uses with advanced transparent mirror, sensing distance can be up to 5-8m. Lighting sensor can adjust the light inensity intelligently according to the surrounding lighting brightness to compensate, output standard 0-10V signal, soft lighting changes without blinking. There are three working modes to choose: timer, lighting compensation level adjustable.
Technical parameters
Working temperature: -20-60°C Power supply: 100-240VAC, 50-60HZ
Input current: <12mA Output signal: 0-10VDC
Static power: <1.5W Gross weight: 105g
External dimension: Φ95 * H49mm Net weight: 148g
Packing size: L106 * W106 * H55mm Light threshold range: 0-1023 lux
Ham should angle: 120 degrees. Delay time range: 6-30s
Sensing distance: 5-8 m Relay power: 5A-250V
External Dimension:
Top view diameter size diagram
Side height size diagram
Button instruction and Interface instruction
Button and interface diagram
1,Grade: set light compensation grade, the compensation values are devided into 16 grades, and then set the grade to compensate, the grade corresponds to the actual compensation percentages, as shown below:
|
Grade |
Percentage |
Grade |
Percentage |
Grade |
Percentage |
Grade |
Percentage |
|
0 |
6% |
4 |
31% |
8 |
56% |
c |
81% |
|
1 |
12% |
5 |
37% |
9 |
62% |
d |
87% |
|
2 |
18% |
6 |
43% |
a |
68% |
e |
93% |
|
3 |
25% |
7 |
50% |
b |
75% |
f |
100% |
2,CDS: set light compensation upper limit CDS, range is 0-1023 lux, in light induction mode, environmental illumination is less than CDS, it conducts light compensation, over CDS, no compensate. In human body induction mode, CDS outputs as the compensation value, realizes adjustable compensation.
3,Time: set the timer, range is 6-30s
4,Modl: set the working mode, “1” and “2” are dial switches, brush to “ON” means on.
|
1 |
2 |
Mode |
Remark |
|
on |
off |
PIR |
Human body induction |
|
off |
on |
CDS |
Light induction |
|
on |
on |
PIR & CDS |
Human body and Light induction |
|
off |
off |
Disable |
Disable-invalid |
5,Input: power input interface of controller, range is 100-240VAC, 50-60HZ.
6,Output: connect with power interface of dimming power supply, let the controller supply power to the dimming power supply
7,0-10V: connect with 0-10V interface of dimming power supply, output compensation signal, range is 0-10VDC.
Configure the controller
- 1. After the installation is completed, according to the actual need, select a working mode to configure.
- 2. Human body induction mode: output signal is adjusted by CDS, output adjustable 0-10V, timer is adjusted by Time, range is 6-30s.
- 3. Light induction mode: in the current environmental illumination, adjust CDS and grade to make the light compensation stabilized at the desired brightness.
- 4. Human body induction and light induction mode: in the current environmental illumination, adjust CDS and grade to make the light compensation stabilized at the desired brightness. Timer is adjust by Time, and range is 6-30s.
Application phenomenon
- 1. Human body induction mode: The lamps will remain off when controller does not sense the person moving all the time. When the controller sense person moves, the lamp will light up accoding to the set CDS; when the light is lit, and controller does not sense the person moving, after the set delay time, the lamp will go off.
- 2. Light induction mode: when the external light intensity is less than CDS, it will conduct light compensation according to the external light intensity and grade, the brightness of lamp will change slowly. When the external light intensity is larger than CDS, the lamp will not compensate, and go out slowly.
- 3. Human body induction and light induction mode: use the human body induction signal as switch control, brightness of lamp output as the light induction compensation.
Reference standards for illuminance in common environment
|
Illuminance (lux) |
Place |
|
1000-500 |
Writing, do homework |
|
750-300 |
Reading, makeup, kitchen table, conditioning, telephone |
|
300-150 |
Sink, recreation room, living room, reunion, entrance (inside) mirrors |
|
150-70 |
Wardrobe, bedroom, toilet, stairs, corridors |
|
75-30 |
Number plate, mailbox, door bell button, balcony |
Typical Application
