Heat Shrink Tubing - 0.9mm and 1.4mm

PACK OF 50 Great for the DIY (Do-It-Yourself person) using our 0.9mm and or 1.4mm El Wire or any other wiring project. This Heat Shrink Tubing will provide you with EXTRA protection because it has an adhesive that melts during the shrinking process. When the Shrink Tubing cools the adhesive hardens giving you that EXTRA protection. The adhesive when cooled will add EXTRA strength to your connection and it will also make it a little harder to bend that area and provide a little water resistance.

This is a must have product and it is easy to melt with either a heat gun purchased at any major hardware store or you could use a lighter but a heat gun is recommended. Just make your connection and slide the Heat Shrink Tubing over your connection and while heating "TURN and SPIN the Heat Shrink Tubing to ensure even heat distribution. DO NOT OVER HEAT and DO NOT LET LITTLE CHILDREN UNDER 5 HANDLE OR TOUCH SHRINK TUBING BECAUSE CHOCKING CAN OCCUR)

 

You Get 50 Pieces Of Shrinking Tubing Per Bag

Approximately 3/4 Of An Inch In Length - Please note length can vary by an 1/8 of an inch.

Adhesive On The Inside For EXTRA Protection

Great Item For The DIY Person For El Wire Projects or Other Wiring Projects