DMX Master-Slave SPI Controller

Detailed Product Description

  Master controller picture                                                                     Slave controller picture

 

Summarization

This controller is one of the basic product platform in our company,master controller should collocate with slave controller.It can achieve some functions such as jumpy changing,running water pattern, horse racing,gradual changing and so on,the exact change mode could be ordered according to the requirement of client.

 

 

Technical parameters

   Master controller technical parameters:

    Working temperature: -20-60 °C

   Supply voltage: DC5V, 12V ,18V, 24V<You could choose it>(Order goods need marking out the required voltage)

   Output signal: SPI signal

   External dimension: L224 Χ W128 Χ H37 mm

   Packing size: L230 Χ W180 Χ H55 mm

    Net weight: 760 g

    Gross weight: 830 g

    Static power consumption: <1W

    traffic rate: 19.2Kb/s

 

Slave controller technical parameters: 

   Working temperature: -20-60 °C  

  Supply voltage: DC12V

   Output signal: 36 Channels, SPI signal

   Connecting mode: common anode

   External dimension: L283 Χ W164 Χ H48 mm

   Packing size: L293Χ W174 Χ H58 mm

  Out power: <864W

 Traffic rate: 19.2Kb/s

 

 

External Dimension

External dimension of master controller:

  

External dimension of slave controller:

 

 

 

Interface Specifications

     Master controller interface specification:

         Power input interface:

   

Adopt conventional DC power Transposon as power input interface.

 

 SPI signal output interface: 

                   

Adopt five sheath wires as connecting wires,meanwhile:yellow wire→SPEED  blue wire→CLOCK

       green wire→DATA  red wire→LATCH  black wire→GND

 

Slave controller interface specificetion:

The input interface of power:

  

Adopt conventional DC power Transposon as power input interface.

Load output interface:

 Adopt Aviation plug as load output interface. 

 

SPI signal input and output:

 

Adopt five sheath wires as connecting wires,meanwhile:yellow wire→SPEED  blue wire→CLOCK   green wire→DATA  red wire→LATCH  black wire→GND

 

Direction for use

 

Master controller:

1. Adopt button control, and every button function as follows:

Mode button: mode selection, every pressing, the light color changes one time,there are 22 modes.

              Para button: choose parameter(this controller has only one parameter: speed)

              Up(+)button: to increase speed.

              Down(-)button: to decrease speed.

 

2, Adopt DMX control, the corresponded channel of DMX address code is color choice channel, the address of the code +1 channel is speed control channnel. For example: The address of the code is 1, the channel of color choice is CH1,speed control channnel is CH2, the greater DMX channel value (from 0 to 255) is ,the faster speed is.

 

3.   Standard functional changes have been listed as follows:

 

 

Slave controller:

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not           occur between connecting wire before you turn on the power:
2. supply 36 output channels,the current of each channel is 2A,the total current is 72A;
3. The connection should be correct between master controller output signal wire and slave controller input signal wire.

 

Typical Applications

Typical application one(without DMX function):

 

Typical application two(with DMX function):