24-key Infrared Controller

Detailed Product Description

Product Specifications

 

Name: 24-key Infrared Controller

Model: IR240

 

 

 

Summarization
     

24-key infrared controller adopts the advanced micro control unit,it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light,flexible light strip, wall washer lamp, glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use. Meanwhile,you could adjust brightness, static color choices and various  dynamic changes in lighting effects through infrared remote control. In addition this product has short circuit protection function to make sure the load working normally . 

 

 
Technical Parameters

 

Working temperature	-20-60°C
Supply voltage	DC5V, 12V, 18V, 24V
0utput	3 channels
Connecting mode	common anode
External dimention	L63ΧW35ΧH22mm
Packing size	L105ΧW65ΧH40mm
Net weight	50g
Gross weight	70g
Static power consumption	< 1W
Output current	< 2A(each channel)
Output power	5V: < 30W   12V: < 72W  24V: < 144W

 

 

 

  

External Dimension

         

 

 

 

 

 

Interface Specifications

 

ITEM NAME	PICTURE	REMARK
Power input interface		Adopt conventional power Transposon as a DC power input interface.
Infrared receiver interface		Infrared receiver
Load output interface		Adopt oblate interface , and arrow is designate load output positive .

 

 

 

  

 

Direction for use

 

         1.     Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

      2.    Operation,you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote control and receiving head;

             The key-press functions are shown in the table below (in accordance with the key position order):

             

Brightness rise(a total of eight grading)	Brightness drop (a total of eight grading)	Close load output	Open load output
Static red	Static green	Static	Static white
Static orange	Static light green	Static	Multicolor jumpy changing
Static deep yellow	Static cyan	Static brown	the overall gradually changing
Static yellow	Static light blue	Static pink	Multicolor jumpy changing
Static light yellow	Static pale blue	Static purple	Red, green, blue colour transition

 

 

 

 

Line sequence setting instructions

 

    Press OFF key to close output , then push Brightness+ and load outputs RGB jumpy changing , last RGB line sequence is default . Meanwhile press Brightness- to switch six line sequence in order , and load output jumpy changing shows the current line sequence ; when one line sequence is selected , then press Brightness+ to shutdown load, and setting line sequence is saved. When push ON ,you will find line sequence is changing into the setup line sequence.

 

 

 

 

 

Typical Applications